What does commercial post-construction cleaning cover?
When construction and fit-out work finishes in any commercial premises, it leaves behind fine dust on every surface, plaster and mortar residue on floors, cement or paint spots on glass and frames, and adhesive marks on aluminium and wood. This is not ordinary dust: it works its way into AC ducts, lighting fixtures and tile grouting, and it becomes harder to remove the longer it sits in the summer heat.
Post-construction cleaning is fundamentally different from the routine cleaning done while premises are in use. The work starts from the top, at the ceiling, exposed installations and the upper parts of walls, then moves down to surfaces, doors and windows, finishing with the floors. The reason for this sequence is that dust and debris fall onto whatever is below during the work, and starting with the floors before the ceiling means cleaning them a second time. The scope also includes toilets, building entrances and the immediate outdoor areas where dust has settled.
Call or message us on WhatsApp and tell us the type of premises, the district it is in, the approximate area, and whether construction has finished or is nearly done. We agree a time that suits you and take care of the rest.
These are the surfaces and areas the cleaning goes through in commercial premises after construction, depending on the type and condition of the premises.
- Ceilings and installations
We clean suspended ceiling surfaces, AC vents and newly fitted lights, as they trap dust that later falls onto everything below them.
- Walls and doors
We remove plaster and paint spots and adhesive marks from walls, doors and their frames, wiping painted surfaces carefully to avoid scratching them.
- Glass and aluminium frames
We treat cement spots and tape marks on glass and aluminium before they harden, because the heat causes them to bond firmly if left.
- Floors and tiling
We clear mortar residue from grout lines and treat paint and cement spots on ceramic, marble and parquet without damaging the surface.
- Toilets and kitchen areas
Dust and grit settle in newly fitted toilets and kitchen areas and get into fittings and drains, and we go through these spaces in detail before they are used.
- Entrances and outdoor areas
Construction dust builds up outside the premises, at entrances and along pathways; these are the first areas visitors see on opening day, so they are part of the scope.
What sets King Fahd (near Al Majma'ah) apart
Districts in towns around Riyadh such as King Fahd in Al Majma'ah contain varied buildings, warehouses, shops and residential premises set in wider spaces. Fine construction dust settles on every surface, corner, window and interior detail, and building material marks may remain. Tell us what kind of site it is and roughly how large, and we choose the cleaning approach that fits your needs before use.
King Fahd is a district in the town of Al Majma'ah, and you order the service by call or WhatsApp, with details and time agreed afterwards.
Sites in districts vary in size and layout, so tell us what suits you when you call to help us plan the work better.
Four steps, and done
- 1
Call or message us on WhatsApp
+966 54 084 3018 - 2
Tell us about the premises
Tell us the type of premises, the approximate area, the district, and whether the fit-out work has finished or is still under way.
- 3
We agree a time and you prepare
We settle on a time that works for you; make sure construction work is complete and the premises are accessible, and let us know if any surfaces need particular care.
- 4
We work top to bottom
We start at the ceilings and installations, move through walls and glass, and finish with the floors; check the glass, polished surfaces and entrances at the end to confirm they are free of marks.
Some of our work
What our customers say
Real Google Maps reviews, word for word.
افضل عمال وتنظيف روووعة يعطيكم العافية
Google Maps يعطيكم العافيه.. شغل ممتاز يستاهلون ٥ نجوم
Google Maps شركة نظافة ممتازة يعطيكم العافيه
Google Maps
Questions about Commercial post-construction cleaning
How do I know the premises need post-construction cleaning?
If construction, renovation or fit-out work has finished, the premises need this type of cleaning before opening. The fine dust that looks light accumulates inside AC vents, lighting and grout lines, and cement spots and adhesive on glass and aluminium become harder to remove the longer they sit in the heat.
What makes this different from cleaning the premises while they are in use?
After construction, surfaces carry unusual residue: plaster dust, cement, mortar, adhesive tape marks and paint spots. These need different treatment from daily dirt, and the top-to-bottom sequence is essential because dust falls during the work, and skipping the order means redoing what was already cleaned.
What should I prepare before the team arrives?
Make sure the fit-out work is genuinely complete and that the premises are accessible. If there are surfaces or materials that need particular care, such as polished marble or fine woodwork, tell us when you call. If partial work is still going on in a separate section, let us know so we can agree how to organise the work.
Does the floor type in the premises affect how it is cleaned after construction?
Yes, the floor type matters. Polished marble needs different treatment from matt ceramic or parquet, and cement and mortar spots are removed in a way that suits each surface without harming it. That is why we ask about the floor type when you call, alongside the condition of the other surfaces.
Does the size of the premises affect the price?
Yes, the area is one of the factors the price agreement is based on, alongside the type of premises, its condition, the nature of the surfaces and how accessible some areas are. That is why we ask you to describe the premises when you call, so we can give you a clear picture.
Can the premises be cleaned before some final finishes are installed?
This happens sometimes in large premises when one phase finishes and another is pending. The right approach depends on what is complete and what is not. Tell us the situation precisely when you call and we agree the most suitable step for the stage the work is at.
What is a common mistake when cleaning premises after construction?
A common mistake is starting with the floors or quickly wiping surfaces before the ceilings and installations have been dealt with. Dust sitting at the top of the premises falls back onto the cleaned floors and returns them to their earlier state. Working top to bottom is not a preference but a practical necessity in this type of cleaning.
Do you clean new shops and stores in King Fahd after building is finished?
Yes, we serve commercial sites in districts of towns around Riyadh, including King Fahd in Al Majma'ah. Tell us what kind of site it is, where it is and roughly how large, and we agree a time and handle the removal of construction dust and residue before you open.
Does the clean include outdoor areas and passageways at the site?
What areas you want cleaned is agreed when you call. Tell us if there are outdoor spaces or passageways you want cleaned, and we arrange the work to suit your needs.
Nearby areas for Commercial post-construction cleaning
More services in King Fahd (near Al Majma'ah)
